|
|
Comparative performance of late stream inoculants in grey cast iron using thermal analysis
Chyla, Ondrej ; Bouška, Ondřej (referee) ; Roučka, Jaromír (advisor)
This diploma thesis in the theoretical part deals with classification of cast iron, problems of gray cast iron production, methods of inoculation and valuation of the gray iron quality by means of thermal analysis. The aim of practical part was to investigate effectiveness of inoculation of two different inoculants using thermal analysis. In terms of mechanical properties, hardness and ultimate tensile strength were measured. Metallographic specimen were evaluating by means of image analysis software.
|
|
|
Evaluation of porosity in Al-alloy die-castings
Klocová, Petra ; Nová, Iva (referee) ; Čech, Jaroslav (advisor)
The objective of this diploma thesis is an evaluation of die-castings porosity, eventually the evaluation of seats with local squeeze in connection with their mechanical and structural properties. The swatches of alloy AISi9Cu3 were taken from the engine block made by Škoda Auto Company, Mladá Boleslav. To the evaluation and the comparison of the results there were the other VUT FSI Brno students´ theses used.
|
|
|
Diagnosis sliding contact using practical applications "Methods particulate"
Kopecký, Jiří ; Mach, Martin (referee) ; Veselka, František (advisor)
This thesis deals with the sliding contact of electrical machines and its diagnostic methods. Namely, the dust-particles method for assessing the length decrease of brushes is deeply described. Then, usage of the method in industry is described. The comparison of accuracy between manual version and new automated version of the method using computer analysis is presented. The final section is devoted to the practical verification of the new automated version which was developed especially for large machines. Measurements were performed on a small machine.
|
|
|
Al-alloy die-castings-trends in industrial
Rýdel, David ; Pacal, Bohumil (referee) ; Čech, Jaroslav (advisor)
The objective of this diploma thesis is to state the influence of porosity, DAS and shape factor on mechanical characteristics for the cast transmission cover made in Kovolit Modrice a.s.Which was molten from AlSi9Cu3. It was used an imaging software (Olympus Five) for classification of metallographical structures.
|
|
|
Effect of Cement Bypass Dust on Cracking Tendency of Alkali-Activated Slag during Drying
Krejčová, Marie ; Švec, Jiří (referee) ; Bílek, Vlastimil (advisor)
This bachelor thesis deals with the influence of bypass cement dust on cracking of alkali activated slag. Significant shrinkage and cracking prevent greater use of alkali activated slag. The length changes and strength of the mixtures with different amount of bypass cement dust were measured at various curing conditions. In these mixtures, cracks were observed and their amount was evaluated by image analysis. It has been found that the addition of dust can reduce the amount of cracks. Treating the prisms in a humid environment leads to a reduction of cracks, especially during long-term treatment. In order to improve flexural and compressive strength, it is preferable to use dust as a replacement for part of aggregates and not as a partial slag replacement.
|
|
|
Optimization of the Methodology for Assessment of Biochar Effect on the Growth of Model Plants
Štorková, Natálie ; Enev, Vojtěch (referee) ; Kalina, Michal (advisor)
This bachelor thesis is studying the effect of biochar on the growth of model plant and deals with the optimalization of the methods for assessing its impact. Theoretical part describes the properties and utilization of soil conditioners, special attention is focused on biochar. According to the literature research, maize (Zea mays) was chosen as a model plant for cultivation experiment and subsequently the application doses of biochar were also defined. The cultivation experiment took place in growing box under controlled illumination and irrigation. Plant dry weight weighing after cultivation, continuous measurement of plant height during the cultivation and also image analysis of the root system were used for evaluating the influence of biochar on quantitative and qualitative properties of model plants. From obtained data it can be summarized that the growth differences were influenced by the application dose, the type of biochar and also by type of soil, which was used for the cultivation experiment.
|
|
|
Optimation of inoculation process of ductile iron
Ulm, Daniel ; Pecina, Vladimír (referee) ; Roučka, Jaromír (advisor)
The master‘s thesis deals in theoretical part with the casting classification, ductile iron casting, its inoculation and modification and quality evaluation using thermal analysis, image analysis and testing of mechanical properties. The aim of the practical part was to test the effects of preconditioning on the properties of ductile iron and to find out whether it is able to replace the current method of inoculation or to increase the mechanical properties of ductile iron castings. The state of the ductile iron was under control by spectral and thermal analysis. The mechanical properties and image analysis were checked on finished casting.
|
|
|
Study of thin film organic materials thickness
Hegerová, Lucie ; Veselý, Michal (referee) ; Zmeškal, Oldřich (advisor)
The diploma thesis deals with the determination of thickness and refractive index of thin organic films using image analysis. In the theoretical part there are described principles of the methods, which are used to prepare the films (spin coating, inkjet printing, vapour deposition), the characteristics of thin films, ways of finding out the thickness and refractive index of substances (weight methods, electric methods, method based on measurement of absorption coefficient of light, interference microscopy, ellipsometry) and also image analysis (harmonic and wavelet analysis). Interference microscope Epival - Interpako (Carl Zeiss Jena), digital camera Nikon Coolpix 5400 and computer were used for the determination of thickness and refractive index. The thicknesses of layers were set on the basis of interference images of edges and grooves – both from the side of the metal contact and the side of underlying glass. The refractive indices of thin layers were then set using the recorded figures. In the final part of the thesis there are discussed the results of interference images photographed along the full length of the aluminium contact which are used for measuring electrical characteristics of DPP structures. The produces are thicknesses and refractive indices of individual layers.
|
|
|
Study of refractive index dispersion dependences with using of interference microscopy
Schmiedová, Veronika ; Veselý, Michal (referee) ; Zmeškal, Oldřich (advisor)
The master´s thesis deals with the study of optical properties of thin transparent layers on the organic materials (PPV, P3HT, TiO2, DPP) and especially with the determination of dispersion dependences of refractive index of prepared thin layers. In the theoretical part there are described principles of deposition thin layers of the analyzed materials and their properties. In addition, there are also described methods of optical properties measurements (optical and interference microscopy and ellipsometry). The combination of interference microscope with digital camera was used for determination of refractive index. The image analysis was used for the determination of parameters (with help of the software HarFA). The images of thin layers surfaces were analyzed from the side of the metal contact as well as from the side of glass. In conclusion, there are presented results of the refractive index of the thin layers obtained from the measured values.
|
|
|
Ovality measurement of extruded fiber using three cameras
Loučka, Pavel ; Martišek, Dalibor (referee) ; Štarha, Pavel (advisor)
One of the important parameters observed during extruded fibre fabrication is its diameter. The diameter can be measured with a single scanning camera assuming that the fibre section has a circular shape. As proved in practice, another important parameter is ovality, that is the rate of fibre flattening. This paper assumes that the fibre section shape is elliptical. In such a case, at least three different views on examined fibre are needed. Mathematical part of this paper is concerned with analytical description of fibre ovality measurement using two different approaches based on the knowledge of linear algebra, projective geometry and conic sections theory. Main goal of this paper is thus to use both mathematical theory and image analysis methods for ovality and diameter determination. Precise calcluation of such quantities is, however, conditioned on precise camera system calibration, which is described in the paper as well. Additionally, the work contains a brief mention of technical realization of ovality measurement and its possible difficulties.
|
guest ::
